Hitachi Roofing Coil NailerDiscription: Hitachi NV45AB2 Roofing Coil Nailer
Hitachi Siding Coil Nailer. Coil, Wire-Plastic Sheet Collation. 1 1/2" - 2 1/2" x .090 - .099. Lightweight, only 4.6 lbs. Depth of drive adjustment to countersink or flush drive nails. Drives wire and plastic sheet collated nails. 360° adjustable exhaust deflector. Operating air pressure of 70-120 PSI. Air consumption of .049 ft. cubed per cycle at 100 PSI. Nail capacity of 200-300 nails. 3/8" Air Inlet and Dimensions of 10-1/2'' x 5-1/16'' x 11-13/16''. Used for siding, fencing, decking, wall and roof sheathing, mobile home and modular housing construction and crate and pallet construction. Standard Accessory: No Mar Nose Cap.
Lightweight 5.5 lbs., rapid driving and quick response with cylinder valve firing mechanism Convenient top loading magazine Adjustable shingle guide for USA and Canada Tool-less depth adjustment Carbide tipped Push Lever to reduce wear Rubber Pads help keep a nailer from sliding off the roof A sequential trip mechanism kit (single shot parts) is available as an option
Fastener Diameter Range: 0.120
Magazine Loading: Side
Air Inlet: 3/8 Inch
Magazine Capacity: 120
Jam Clearing: Tool-Less
Depth Setting: Tool-Less
Operating Pressure: 70-120 psi
Actuation: Contact, Sequential Optional
Lenght: 9-27/32 Inches
Width: 4-5/8 Inches
Height: 10-3/8 Inches
Tool Weight: 5.5 Pounds
Fastener Type: Coil, Wire Collation
Magazine Angle: 16&Deg
Fastener Length Capacity: 7/8 x 1-3/4 Inches
Shipping Weight: 7.25 lbs.
![]() |







